ELECTRONIC THERMOSTAT DR011-REGULATING-PRODUCTS

Current Location：

Home>Products>REGULATING>ELECTRONIC THERMOSTAT DR011

PROTECTION

In practice, the climate conditions for electrical and electronic components are not always ideal. To minimise the resulting risks and to optimise the operating conditions in equipment DBOKE provides a wide range of temperature and humidity control systems making sure that electrical and electronic parts are protected from humidity, heat or cold. Complementary DBOKE offers suitable lamps and accessories.

ELECTRONIC THERMOSTAT DR011

DR011 double temperature controller Adjustment of the heater thermostat (contact breaker, normally closed) contacts open when the temperature rises, when the temperature exceeds the limit, the filter regulator thermostat fan and a heat exchanger means or a switch signal (disconnection contacts , a normally open) contact is closed when the temperature rises. The heater and cooling device can be switched independently from one another rather than the usual temperature of the working shift of changeover contacts.

Technical Parameters：

Switch temperature difference: 7K (± 4K tolerance)

Sensor element: thermostatic bimetal

Service life: > 100,000 cycles

Max. switching capacity：250V/AC,10(2)A、120V/AC,15(2)A、DC30W

Connection: terminal 2, the maximum clamping torque 0.5NM

Rigid wire 2.5 mm2

Stranded glue line 1.5 mm2

Installation: 35 mm DIN rail, in line with EU standards.

Casing: plastic according to UL94 V-0. light grey

Dimensions: 67 * 50 * 46 (mm)

Installation: the case may be.

Operating/Storage temperature: -45 ~ 80 ℃ (-49 ~ 176 ℉)

Protection type：IP20

01172.0-00	NC	0~60℃	NO	0~60℃
01172.0-01	NC	32~140℉	NO	32~140℉
01175.0-00	NC	-10~50℃	NO	20~80℃
01175.0-01	NC	14~122℉	NO	68~180℉
01176.0-00	NO	0~60℃	NO	0~60℃
01176.-01	NO	32~140℉	NO	32~140℉